Difference between revisions of "Advanced avionics"

From UOAF Codex
Jump to navigation Jump to search
Line 10: Line 10:
  
 
=DED pages=
 
=DED pages=
 +
==CRUS Page==
 +
The Cruise page provides information for navigation, time and fuel while cruising. It has 4 submodes:
 +
:*TOS (Time Over Steerpoint)
 +
:*RNG (Range)
 +
:*HOME
 +
:*EDR (Endurance)
 +
Each submode '''MUST BE''' mode selected to become active and supply accurate information and cues.(HUD carrets mainly) Remember mode-selecting is done with the M-SEL 0 button and when active highlights the area.<br />
 +
The submodes of the CRUS page are accessed sequentially with DCS SEQ.<br />
 +
[[File:UFC CRUS-TOS-page.jpg|thumb|right|CRUS page in TOS submode]]
 +
===TOS (TIME Over Steerpoint) submode===
 +
This submode is used a lot by flight leaders to respect mission timings.(that's what they're talking about when they're saying i.e "Lobo 1 is on carret")<br />
 +
When activated with M-SEL a carret is displayed on HUD in the speed tape. To ensure that you reach the steerpoint on time for TOS match your airspeed with the caret.<br />
 +
The ETA to the steerpoint is also displayed in the HUD.
 +
[[File:UFC CRUS-RNG-page.jpg|thumb|right|CRUS page in RNG submode]]
 +
===RNG (Range) submode===
 +
When RNG is mode selected a caret is displayed on the HUD speed tape to pinpoint the best conserve fuel speed at this altitude. Optimum speed for fuel conservation changes with altitude.<br />
 +
Only the active steerpoint can be toggled on this subpage.<br />
 +
Further information given on this page shows fuel remaining when reaching the active steerpoint, wind direction and speed.
 +
[[File:UFC CRUS-HOME-page.jpg|thumb|right|CRUS page in HOME submode]]
 +
===HOME submode===
 +
When HOME is mode selected 2 carets are displayed in the HUD on the speed tape and on the altitude tape. Following these 2 carets will establish the best profile to reach Home Plate (or any steerpoint designated as HMPT).
 +
The procedure to fly this profile is to select full military power, reach the speed caret first then pitch to reach the altitude mark while maintaining the speed on the caret. Altitude may vary according to fuel burned.<br />
 +
Please note, optimal altitude is given in radar altitude on the DED, but may be different on your HUD scale depending on the altimeter setting. If you follow both carets you will reach the home point at the selected optimum altitude. The altitude caret will disappear once you can start your descent.<br /> Further information displayed on this page indicates home point (can be changed to any INS steerpoint (e.g. alternate)), onboard fuel quantity remaining when reaching active steerpoint, optimum altitude for the HOME profile, wind direction and speed.
 +
[[File:UFC CRUS-EDR-page.jpg|thumb|right|CRUS page in EDR submode]]
 +
===EDR (Endurance) submode===
 +
When EDR mode is mode selected a speed caret is placed on the HUD tape to give a reference speed for best endurance at this altitude. This is very useful for holding patterns or maximum endurance cruise for instance. Further information given is time to bingo, optimum Mach number and wind direction and speed.
 +
 
==Time page and ROLEX==
 
==Time page and ROLEX==
 
[[File:UFC Time-page.jpg|thumb|right|TIME page]]
 
[[File:UFC Time-page.jpg|thumb|right|TIME page]]
Line 20: Line 47:
  
 
==BINGO page==
 
==BINGO page==
[[File:UFC BINGO-page.jpg|thumb|right|TIME page]]
+
[[File:UFC BINGO-page.jpg|thumb|right|BINGO page]]
 
The BINGO page is where you input your briefed Joker/Bingo settings. It is made up of two lines: the first one is where you enter your Joker or Bingo setting and the second line is the total fuel remaining on board. It is good practice as a mission begins to input the Joker value. You can then reset it to the briefed Bingo value once Joker fuel is reached.<br />
 
The BINGO page is where you input your briefed Joker/Bingo settings. It is made up of two lines: the first one is where you enter your Joker or Bingo setting and the second line is the total fuel remaining on board. It is good practice as a mission begins to input the Joker value. You can then reset it to the briefed Bingo value once Joker fuel is reached.<br />
 
Assuming those fuel consumption :  
 
Assuming those fuel consumption :  

Revision as of 13:44, 20 March 2017

Learning objectives

  1. CRUS page
  2. Time page and ROLEX
  3. BINGO page
  4. STPT page
  5. MARK page
  6. TFR
  7. FLIR


DED pages

CRUS Page

The Cruise page provides information for navigation, time and fuel while cruising. It has 4 submodes:

  • TOS (Time Over Steerpoint)
  • RNG (Range)
  • HOME
  • EDR (Endurance)

Each submode MUST BE mode selected to become active and supply accurate information and cues.(HUD carrets mainly) Remember mode-selecting is done with the M-SEL 0 button and when active highlights the area.
The submodes of the CRUS page are accessed sequentially with DCS SEQ.

CRUS page in TOS submode

TOS (TIME Over Steerpoint) submode

This submode is used a lot by flight leaders to respect mission timings.(that's what they're talking about when they're saying i.e "Lobo 1 is on carret")
When activated with M-SEL a carret is displayed on HUD in the speed tape. To ensure that you reach the steerpoint on time for TOS match your airspeed with the caret.
The ETA to the steerpoint is also displayed in the HUD.

CRUS page in RNG submode

RNG (Range) submode

When RNG is mode selected a caret is displayed on the HUD speed tape to pinpoint the best conserve fuel speed at this altitude. Optimum speed for fuel conservation changes with altitude.
Only the active steerpoint can be toggled on this subpage.
Further information given on this page shows fuel remaining when reaching the active steerpoint, wind direction and speed.

CRUS page in HOME submode

HOME submode

When HOME is mode selected 2 carets are displayed in the HUD on the speed tape and on the altitude tape. Following these 2 carets will establish the best profile to reach Home Plate (or any steerpoint designated as HMPT). The procedure to fly this profile is to select full military power, reach the speed caret first then pitch to reach the altitude mark while maintaining the speed on the caret. Altitude may vary according to fuel burned.
Please note, optimal altitude is given in radar altitude on the DED, but may be different on your HUD scale depending on the altimeter setting. If you follow both carets you will reach the home point at the selected optimum altitude. The altitude caret will disappear once you can start your descent.
Further information displayed on this page indicates home point (can be changed to any INS steerpoint (e.g. alternate)), onboard fuel quantity remaining when reaching active steerpoint, optimum altitude for the HOME profile, wind direction and speed.

CRUS page in EDR submode

EDR (Endurance) submode

When EDR mode is mode selected a speed caret is placed on the HUD tape to give a reference speed for best endurance at this altitude. This is very useful for holding patterns or maximum endurance cruise for instance. Further information given is time to bingo, optimum Mach number and wind direction and speed.

Time page and ROLEX

TIME page

The TIME page allows the pilot to set a HACK timer and a DELTA TOS for ROLEX calls. The first line gives the current system time. The second line is the hack timer. As the arrows indicate, pressing the ICP NEXT rocker button will start/freeze/resume the timer and ICP PREVIOUS rocker button will reset the hack timer to zero. When the HACK timer is running it is also visible on the CNI page.
ROLEX calls are initiated when TOS for all steerpoints need to be adjusted. This is done through the TIME page by changing the DELTA TOS. Place the scratchpad on the DELTA TOS line and input the ROLEX value. If a minus is required start your input with the 0 (zero) ICP key for the minus sign.

For instance: “Mamba flight Rolex +2” => TIME, DCS down to DELTA TOS: 2, 0, 0, ENTR
Another example: “Mamba flight Rolex -3” => TIME, DCS down to DELTA TOS: 0, 3, 0, 0, ENTR

BINGO page

BINGO page

The BINGO page is where you input your briefed Joker/Bingo settings. It is made up of two lines: the first one is where you enter your Joker or Bingo setting and the second line is the total fuel remaining on board. It is good practice as a mission begins to input the Joker value. You can then reset it to the briefed Bingo value once Joker fuel is reached.
Assuming those fuel consumption :

  • Low alt = 20 lbs/Nm - 100 ft to FL150 / RPM 100% / 540 kts GS
  • Med alt = 15 lbs/Nm - FL150 to FL250 / RPM 100% / 540 kts GS
  • Hgh alt = 10 lbs/Nm - FL250 to FL400 / RPM 100% / 400 kts GS

Here is a quick way to calculate your BINGO :

(return leg * consumption) + (diverted leg * consumption) + normal recovery fuel (F-16 MLU ,block 10, 15, 20, 25, 30 and 32 = 1000 lbs / F-16 block 40 to 52 = 1200 lbs) + two landing trials (400 lbs).

The JOKER is usually set to BINGO + 1000 lbs which correspond to 1 mn of afterburner or 10 mn of flight time at 350 kts.

BMS FUEL chart.jpg


STPT page

STPT page

The Steerpoint page gives the pilot information about the INS steerpoint.

  • The first line allows the pilots to toggle the active steerpoint with the NEXT/PREV ICP buttons (notice the up & down arrows) and the MAN or AUTO steerpoint function, which can be toggled with DCS SEQ. MAN means that the new steerpoint has to be manually selected. AUTO will increment to the next steerpoint automatically when the INS detects the proximity of the current waypoint. In AUTO mode an “A” symbol is displayed on the CNI page next to the steerpoint.
  • The second line is the LATITUDE of the currently selected steerpoint. Placing the scratchpad there will let the pilot enter the latitude for this particular navigation point.
  • The third line is the LONGITUDE of the selected steerpoint. It can also be changed by placing the scratchpad accordingly and entering new coordinates.
  • The fourth line is the elevation of the steerpoint (the altitude at which you are supposed to overfly the steerpoint according to your INS flight plan). This is different from the real jet that has the ground spot height for steerpoint in this field (it is quite relevant to TGP mechanisation and finding the target).
  • The fifth line is the TOS (Time Over Steerpoint) which gives you the local time the steerpoint will be reached, if you are following the route of flight as planned.

MARK page

MARK page

The MARK page is used to create markpoints. Ownship markpoints are stored in steerpoints 26-30.(Once #30 is filled, the next markpoint will overwrite #26 and so on)
Markpoints can be made from 4 different systems:

  • OFLY (Overfly GPS/INS)
  • FCR (Fire Control Radar)
  • HUD (Head Up Display)
  • TGP (Targeting Pod).

There are thus 4 submodes in the MARK page. To toggle between the submodes use DCS SEQ. The system defaults to a specific subpage according to master mode and Sensor of Interest (SOI) and may enable automatic markpoint recording (automatic markpoint are only made in the Air to Air mode)
Markpoints are created with TMS forward (TMS up) and are visible on the HSD page once created as a cyan cross.

{{#invoke:Navbox|navbox}}