Difference between revisions of "BMS Configuration and Setup"

From UOAF Codex
Jump to navigation Jump to search
Line 110: Line 110:
 
* http://forums.unitedoperations.net/index.php/topic/15693-bms-advanced-joystick-bindings-shift-states-without-joystick-software/
 
* http://forums.unitedoperations.net/index.php/topic/15693-bms-advanced-joystick-bindings-shift-states-without-joystick-software/
  
=Weapons Delivery Planner=
 
Have you ever grown tired with tirelessly saving Pre Planned Threat Circles before every campaign meeshun? Have you ever wanted to change your Chaff/Flare programs so they are more effective? What about editing your MFD setups?
 
  
This program does it all.
 
 
==Automatically and Simply Loading Pre Planned Threat Circles==
 
 
#Install Weapons Delivery Planner
 
#Make a package in the campaign and remember its save file. Remember the package number.
 
#Open WDP program, reference "DataCard" section it should be the default view once the program has been opened. Where it says "Open Meeshun", reference your campaign save.
 
#Find the package you are flying and your flight using its package number. When you click it, a screen will come up with loadout information, just click okay.
 
#Click on "Map" tab on the top.
 
#Find the button that says "Auto PPT". Click this and then click Save DTC.
 
Every major SAM (SA-2,3,4,5,6) will be saved onto your data cartridge permanently. Keep referencing new Campaign saves as the campaign rolls on to update the status of SAMs.
 
 
*Important Note: There is no such thing as a .ini for a campaign so the PrePlannedThreats will not appear on the 2D UI. When you enter the game, the PPT's will appear.
 
 
==Manipulating Chaff/Flare Programs==
 
# Click on DTC tab on top of program.
 
#Reference "EWS" page.
 
#Edit to your likings. BQ = Burst Quantity, BI = Burst Interval, SQ = Number of Sequences, SI = Sequence Intervals. I would reccommend asking for my chaff/flare programs as they are highly effective if you are confused about what all this means. Just ask me when I'm available.
 
 
==Manipulating MFD Setups==
 
#Reference DTC tab on top of program.
 
#Click "MFD" on top of screen.
 
#Edit as you wish. The Master mode is displayed as a box (e.g. A-G, A-A, NAV) and is read from left to right as it will appear in your cockpit.
 
  
 
{{Nav UOAF}}
 
{{Nav UOAF}}

Revision as of 01:28, 24 March 2017

Home-pit.jpg


Learning objectives

  1. Install BMS and update to the latest version
  2. Configure your controllers
  3. Configure the most common settings
  4. Set up windowed mode, if necessary

Learning files

Installing BMS

To install BMS you’ll need to install a copy of Falcon 4 to your hard drive. You can get this version from Steam, GOG, etc, and it is relatively cheap.

Once you’ve gathered all the components do the following:

  1. Download and install original Falcon 4
  2. Download 4.33 U1
  3. Download 4.33 U2
  4. Download 4.33 U3
  5. Install U1
    1. Easiest is to place the setup at C:\Falcon BMS 4.33 U1 Setup
    2. Verify install works
    3. Verify version FALCON BMS 4.33.1 (x64) BUILD 15227
  6. Update U2
    1. Make sure you install the update into the U1 SETUP folder
    2. Rerun the setup and update to U2
    3. Verify version FALCON BMS 4.33.2 (x64) BUILD 15754
  7. Update U3
    1. Make sure you install the update into the U1 SETUP folder
    2. Rerun the setup and update to U3
    3. Configure for windowed mode
    4. Verify version FALCON BMS 4.33.3 (x64) BUILD 16068

After the installation is finished, don’t delete the setup folder, as you’ll need it to patch the game later. BMS always checks for a valid Falcon 4 install, so do not uninstall Falcon 4.

Patching BMS

To update to a newer version of BMS, download the update and apply it in the same manner as the Update 3 executable above, then run setup.exe again. The game will automatically detect your install and patch the game to the downloaded version.

Configuring BMS

After installing the game, run the shortcut to the game and click Configuration in the launcher. In this window are options that cannot be changed in game, like advanced graphics options and avionics options. The settings are down to personal preference. VKing recommends Color MFD, EPAF Radar Cues, Gray scale AG Radar, and Smaller HSD/Bullseye Symbols.

In the game, click Logbook at the top of the screen. This will show your player profile. Change both name and callsign to your nickname and pick a pilot picture and/or squadron patch if you like.

Go to the Setup screen and check “Radio calls use bullseye”, then configure the rest the way you like.

Enabling Human Awacs

To greatly increase the range you can hear a Human AWACS transmit over uhf/vhf, a single command line needs to be added to IVC Client ini.

First open up the IVC Client.ini. This is located in your BMS Folder/Bin/x86/IVC

IVC File Location.png


Once the file is opened you will see a line "#outsiders = seat" Change this to "outsiders = Awacs". Make sure the A in Awacs is capitalized as in the below pic.

Human Awacs.png


Once done save and close

Enabling Borderless Windowed Mode

Enabling borderless windowed mode in BMS allows you the ability to alt-tab out and back in without crashing the bms client. To enable this mode open up your bms launcher and select configuration.

Windowed mode part 1.png


Under the Hardware -> External Displays You will see 1. Cockpit Displays to External Windows and 2. External Windows Always on Top. Enable both of these are you see in the pic above. Save your selection by clicking Apply Changes at the bottom right.

Next we need to configure the external windows we have enabled. In the bms launcher open Cockpit Display Extraction.

Windowed mode part 2.png


On the left we have 7 windows available for editing. We only want to enable the Main window, unless you are using a real life HUD/RWR/MFD/DED/PFL. In the Main window it will have the Enabled box selected and greyed out, unselect Borders. For the Adjust window rectangle select Left=0 and Top=0, Width and Height will be greyed out and selected as 0. For the other windows(HUD,RWR,MFD,DED,PFL) make sure to unselect all enabled boxes, this will disable them from appearing. After completion save your changes by clicking Save & Close.

When opening up BMS it will be a smaller window in the top left of the screen. When entering into the 3D pit the window will open up to fullscreen windowed borderless and match your preset Resolution.

Using borderless windowed mode is highly recommended. This will allow you to alt-tab out and do other things like change channels in Teamspeak. When you rejoin back into the 3D pit you will see an annoying windows mouse cursor follow out of sync with the bms cursor. To disable the windows mouse cursor in bms simply click the combination CTRL+ALT+DELETE, and then ESCAPE key. It will lag for around 1-2 seconds then put you back into the 3D pit with the windows cursor gone.

Controllers

There are many different controllers and tips for configuring them. Check out Controllers for information on how to set things up.

Setting up the Data Transfer Cartridge (DTC)

After setting up your pilot, go to any Tactical Engagement then click on the DTC button on the right side of the map (second from the bottom, above the button with a sun and clouds). Go to the EWS tab and click Reset followed by Save. This will make sure you have a countermeasure program to use in game. Then go to the MFD tab and do the same to. Later you can configure your DTC as you please, but if you don’t follow these steps you might not have any MFD pages or countermeasure programs when you play.

  • good thing is to also ensure you have the display bullseye box ticked otherwise you won't have your own BE in the HUD
  • if using precision steer points a lot it's good idea to RESET (don't hit CLEAR) as sometimes they will stick from a prior mission- and can make for a bad day.
  • if you're an OCA fan, maybe use prog 4 for a heavy flare load for low-level egress off the target
  • don't set to AUTO or you can run out of chaff/flare very quickly!

Multiplayer

Connecting to a multiplayer game

Connecting to a host in BMS is done in a older fashion than more modern games, to connect to someone hosting a BMS session you require the following pieces of information:

  • The Server/Host external IP address (This can be acquired by accessing the UO main website and clicking "Server Info," or if privately hosting, searching for “What’s my I.P?” in Google).
  • The Connection bandwidth. This is your allowed downstream and upstream to the host, normally this is recommended to be kept to 1024 (kilobits). This value may change depending on the host's total bandwidth allocated to the game, however it is important that ALL clients use the same connection bandwidth to avoid synchronization conflicts. If in doubt, ask the host.
  • IVC IP address. This box can be left empty, or unchecked if not using IVC. An IP address needs only be entered if someone else is hosting the IVC server. (IVC is covered further on in this guide).

After getting this information, you can use the Comms button at the top of the main menu and create a bookmark with the information for the server you wish to connect to. Once completed, you may save the bookmark for future use.

Forgetting to input a connection bandwidth value in the comms menu will break the multiplayer session for everyone. Double check that this value is entered.

Once connected to the host, you will return to the main screen. However the “Comms” button will now instead display a chat window for the main menu. This can be used for some pre-game chatter if IVC or Teamspeak is occupied. From here, you will now be able to proceed to either the Tactical Engagement or Campaign section and select the Online option. If the Host has a game running, their game will be displayed here and allow you to connect. Please ensure that is is safe to join with the host first before connecting to a server, BMS can sometimes run into issues if someone joins whilst something is being changed.


{{#invoke:Navbox|navbox}}