SRS

From UOAF Codex
Jump to navigation Jump to search

Simple Radio Standalone (“SRS”) Setup & Use for DCS World with UOAF


INSTALLATION

Download the latest version of SRS here.

Unzip the folder (I recommend 7Zip) and run Installer.exe located inside.

SR1.png

“Install Location” may be anything, but “Saved Games” folder must point to the correct location, typically Users\YourName\Saved Games. Install SRS.


SETUP

SRS2.png

On the main SRS window, from top to bottom, observe the following:

Microphone is set appropriately

Speakers are set appropriately

Mic Passthrough is disabled -- this is NOT sidetone, and is useful only for recording your output from SRS into software like OBS.

Observe the plug icons on the bottom of the window. The three circled must appear GREEN when you are in the cockpit of your aircraft, or SRS will not be working properly.


SRS3.png

On the Controls page, assign Radio 1 through 4 to different keys. Some modules have as many as four radios (F/A-18C), while others have as few as two (F-16CM). Bind only the number you will need.

SRS4.png

On the Settings page, under the Global Settings header, ensure “Auto Select Profile For Aircraft” is ON.

Default Profile

Default.png

For most DCS World modules, it is acceptable to use a “default” profile.

Ensure “Radio Switch works as Push To Talk (PTT”) is ON.

“ALWAYS allow SRS Hotkeys” may be on or off.

“Allow INCOCKPIT DCS Controlled PTT” may be on or off.

Ensure “Push to Talk Release Delay (ms)” is enabled. Value is user preference.

A-10C & A-10C II

A10.png

For the A-10, create a profile called “A-10” (which SRS will automatically select when you fly it). Ensure “Radio Switch works as Push To Talk (PTT)” is ON. Ensure “ALWAYS allow SRS Hotkeys” is ON. Ensure “Allow INCOCKPIT DCS Controlled PTT” is OFF. Ensure “Push to Talk Release Delay (ms)” is enabled. Value is user preference.

In DCS World, do not bind the keys associated with the COM hat to your HOTAS (you may need to bind them elsewhere, as they can be used to interact with AI elements in the game).


F-14A & F-14B (PIC & RIO)

F14SRS.png

For the F-14, create a profile called “F-14” (which SRS will automatically select when you fly it).

Ensure “ALWAYS allow SRS Hotkeys” is OFF.

Ensure “Allow INCOCKPIT DCS Controlled PTT” is ON.

Ensure “Push to Talk Release Delay (ms)” is enabled. Value is user preference.

In DCS World, bind the keys associated with the SRS-exclusive mic switches to your HOTAS. You may need to bind the non-SRS versions of those mic switches to other keys to interact with AI elements in the game.


Back to DCS Codex