Difference between revisions of "RWR"

From UOAF Codex
Jump to navigation Jump to search
Line 1: Line 1:
 
[[File:RWR.png||none|546x|left|]]
 
[[File:RWR.png||none|546x|left|]]
 
+
The Radar Warning Receiver consists of several antennas, a processing unit, a radar library and a display.<br />
The '''radar warning receiver''' will let you know when radars are radiating towards your aircraft.
+
It allows the aircraft to detect and identify radio emissions of radar systems reaching the aircraft and is a vital tool in both A-A and A-G operations for identifying, avoiding, evading or engaging threats.
  
 
=Learning objectives=
 
=Learning objectives=
Line 9: Line 9:
 
#Switch RWR radar filters
 
#Switch RWR radar filters
 
#Know the difference between NAILS and SPIKE
 
#Know the difference between NAILS and SPIKE
 +
 +
=General information=
 +
==Introduction==
 +
The RWR interface in the cockpit is made through 3 main components :
 +
:*The Threat Warning Prime panel (TWP) is located right next to the RWR display and manages the information displayed. The TWP is made of 6 square lights all featuring a push button. Each indicator has multiple lights (top and bottom) the bottom light comes on when the system is powered and the top light comes on depending on the status of the relevant system, except for the Missile LAUNCH indicator.
 +
:*The Threat Warning Aux panel (TWA) is part of the EWS suite. It is made up of 4 indicators (3 with pushbuttons): SEARCH, ACT/PWR, ALTITUDE & POWER.
 +
:*The RWR displays threat emitters depending on their azimuth relative to your aircraft. It does not though give distance information. The display is made of two concentric circles: inner and outer. The threats are categorized by order of importance; the more lethal threats are placed in the inner circle while the secondary threats are left in the outer. The symbols displayed on the RWR depend on their radar type.
 +
''Note :'' Other RWRs may be installed in other F-16s and have some differences
 +
<gallery heights=250px mode="packed">
 +
File:BMS RWR-TWP.jpg|Blank RWR during normal operations (No threats detected)
 +
File:BMS RWR-TWP test.jpg|TWP and RWR in BITE test
 +
File:BMS RWR-TWA.jpg|TWA panel
 +
</gallery>
 +
 +
==RWR symbols==
 +
The following tables are showing the RWR symbols. Airborne symbols are displayed with an inverted V on top of them to differentiate them from the ground emitters.<br />
 +
''Note :'' Those tables are for the US default RWR (ALR-56) Symbology may differ on foreign F16 (IAF, EAF, BAF etc ...)
 +
[[File:BMS RWR-symbols.png||none|690px|left|]]
 +
 +
 +
=Modes of operations=
 +
==selectable modes from TWP==
  
 
  {{Nav UOAF}}
 
  {{Nav UOAF}}

Revision as of 21:41, 10 April 2017

RWR.png

The Radar Warning Receiver consists of several antennas, a processing unit, a radar library and a display.
It allows the aircraft to detect and identify radio emissions of radar systems reaching the aircraft and is a vital tool in both A-A and A-G operations for identifying, avoiding, evading or engaging threats.

Learning objectives

  1. Know how to verify RWR is on and working
  2. Understand the threat rings
  3. Recognize the different threats
  4. Switch RWR radar filters
  5. Know the difference between NAILS and SPIKE

General information

Introduction

The RWR interface in the cockpit is made through 3 main components :

  • The Threat Warning Prime panel (TWP) is located right next to the RWR display and manages the information displayed. The TWP is made of 6 square lights all featuring a push button. Each indicator has multiple lights (top and bottom) the bottom light comes on when the system is powered and the top light comes on depending on the status of the relevant system, except for the Missile LAUNCH indicator.
  • The Threat Warning Aux panel (TWA) is part of the EWS suite. It is made up of 4 indicators (3 with pushbuttons): SEARCH, ACT/PWR, ALTITUDE & POWER.
  • The RWR displays threat emitters depending on their azimuth relative to your aircraft. It does not though give distance information. The display is made of two concentric circles: inner and outer. The threats are categorized by order of importance; the more lethal threats are placed in the inner circle while the secondary threats are left in the outer. The symbols displayed on the RWR depend on their radar type.

Note : Other RWRs may be installed in other F-16s and have some differences

RWR symbols

The following tables are showing the RWR symbols. Airborne symbols are displayed with an inverted V on top of them to differentiate them from the ground emitters.
Note : Those tables are for the US default RWR (ALR-56) Symbology may differ on foreign F16 (IAF, EAF, BAF etc ...)

BMS RWR-symbols.png


Modes of operations

selectable modes from TWP

{{#invoke:Navbox|navbox}}